ADCOS NV

Injection systems

ADCOS NV has a comprehensive portfolio of polyurethane, methacrylate and silicate based injection systems.

The Adcos technology platform is based on polyurethane, methacrylate or silicate based injection systems: resins, foams, grouts and gels. These systems are primarily used for preventive and problematic leaksealing of below and above grade concrete structures such as metros, tunnels, parkings and dams for repair and maintenance or new construction.

Brochure: Injection systems and technology

Systems based on polyurethane:

  • PURINJECT 1C 115 ECO - Technical data sheet (PDF)

    One component, solvent free, polyurethane injection system ideally suitable for crack injection/water leaks in concrete and masonry structures. Reaction with water yields a semi-rigid polyurethane foam (slightly flexible). To be injected with a one-component pump. Use with 6 to 10% catalyst.
     
  • PURINJECT 1C 55 LV - Technical data sheet (PDF)

    One component, solvent free, low viscosity polyurethane injection system ideally suitable for crack injection/water leaks in concrete and masonry structures. Reaction with water yields a semi-rigid polyurethane foam (slightly flexible). To be injected with a one-component pump. Use with 6 to 10% catalyst.
     
  • PURINJECT 1C FLEX - Technical data sheet (PDF)

    One component, solvent free, polyurethane injection system ideally suitable for water cut-off in wet dynamic cracks and joints. Reaction with water yields a very flexible polyurethane foam. Injected with a one-component pump. Use with 6 to 10% catalyst.
     
  • PURINJECT 1C MULTIFLEX - Technical data sheet (PDF)

    One component, solvent free, polyurethane injection system ideally suitable for crack injection/water leaks in concrete and masonry structures. Reaction with water yields a flexible polyurethane foam. To be injected with a one-component pump. Use with 6 to 10% catalyst.
     
  • PURINJECT 2C ELASTIC LV - Technical data sheet (PDF)
    PURINJECT 2C ELASTIC LV - Declaration of performance (PDF)

    Two component, solvent free, low viscosity (LV) polyurethane injection system for the elastic sealing of cracks in concrete structures. Can be injected with a one-component pump. PURINJECT 2C ELASTIC LV is a CE certified system and is subject to: EN 1504-5 - Principle 1 - Protection against ingress and waterproofing; method 1.4 - the filling of cracks.
     
  • PURINJECT 2C MULTIFLEX 2 in 1 System - Technical data sheet (PDF)

    Two component, solvent free, polyurethane injection system ideally suitable for crack injection/leak sealing in concrete, stone and masonry structures. Reaction with water yields a flexible polyurethane foam and in the second stage or in absence of water an elastic resin. To be injected with a one component pump.
     
  • PURINJECT 2C W - Technical data sheet (PDF)

    A fast-reacting two-component polyurethane injection system, CFC and halogen free. For sealing and hardening in water-carrying zones, particularly against pressurized water.
     
  • PURINJECT 2C D - Technical data sheet (PDF)

    A fast-reacting two-component polyurethane injection system, CFC and halogen free. Hardening of strongly disaggregated, dry or lightly moist mountainous zones.
     
  • PURINJECT 2C THIX - Technical data sheet (PDF)

    Fast reacting 2 component polyurethane injection system for stopping strong water ingress.
     
  • PURINJECT 1C HYDROGEL - Technical data sheet (PDF)

    One component, solvent free, polyurethane injection system, injected with a two component pump with water as the second component. It produces a tough, flexible polyurethane foam or an elastomeric gel or soft gel, depending on the amount of water added. Possible applications: expansion joints, heavy water leakages, screen injections, …
     
  • PURINJECT 1C HYDROFOAM - Technical data sheet (PDF) NEW!

    Hydrophilic and solvent free low viscosity polyurethane injection resin for moving non-structural cracks.
     
  • PURINJECT 1C SOIL - Technical data sheet (PDF)

    Solvent-free polyurethane injection resin for soil stabilization. Harmless for the environment and resistant to biological influence.
     
  • PURCLEAN - Technical data sheet (PDF)

    Special product to clean and grease the injection pump after injection work. Replaces acetone, methylene chloride, and maintains all rubber parts in excellent shape.

Systems based on methacrylate:

Systems based on urea-silicate:

Systems based on silane - siloxane:

ADCOS NV - Ambachtsstraat 15 - 2390 Malle - johan.devroe@adcosgroup.com - T: +32 (0)3 385 38 50