ADCOS NV

Polyurethane systems

Adcos provides polyurethane floor coatings, paint and self levelling systems for every concrete surface. Complete solutions with primer and toplayer paint. These are  typically used for coating concrete floors. It can also be used for bridge, deck, basement, metro, tunnels, flat roofs,... protection and waterproofing.
Adcos, your source for complete polyurethane coating solutions. In our wide range you'll find floor coatings and paint for every concrete surface. Complete floor solutions with primer and toplayer paint. Our polyurethane solutions are typically used for coating concrete floors. Other usage includes bridge, deck, basement, metro, tunnels, flat roofs,... protection and waterproofing.

PURFLOOR 70: SELF-LEVELLING POLYURETHANE FLOORING SYSTEM “add” for offices, showrooms, industrial floorings, concrete floor ...


SYSTEM:
primer - polyurethane floor - aliphatic topcoating

The surface should be clean, dry (<4%), and free from grease and oil to guarantee a good adhesion. Remove dust and free parts. If necessary, sandblast. Adhesion of the surface should be minimal 1,5 N/mm². Apply an epoxy scrape layer for porous surfaces, before applying the primer.


  • EPOXPRIM SF 245

    solventfree primer (standard primer).

  • PURFLOOR 70 (PDF)

    2 component, self levelling, aromatic, polyurethane floor for horizontal applications. PURFLOOR 70 is seamless, and flexible when hardened. Applications on concrete, screeds, cement floors, … for offices, showrooms, private use, industrial floors, basement … Available in all RAL colours.

  • PURTOP 1C

    1 component, solventfree aliphatic polyurethane toplayer paint for polyurethane and epoxy floors. The colour of PURFLOOR 70 will slightly change under influence of UV light. Therefore, it is advised to apply a coloured aliphatic polyurethane topcoat (PURTOP 1C) on top of PURFLOOR 70. It is also advised to apply a transparent topcoat to obtain an optimal scratch resistance. For technical information on the aliphatic colored or transparent topcoat, please consult the technical data sheet of PURTOP 1C.

ONE COMPONENT POLYURETHANE MEMBRANE FOR WATERPROOFING

SYSTEM: primer - polyurethane coating - (fabric) - top coatings

APPLICATIONS: flat roofs, terraces, rooftops, balconies, wet areas, bridge deck, tunnels

Preparation:

The surface should be clean, dry (<4%), and free from grease and oil to guarantee a good adhesion. Remove dust and free parts. If necessary, sandblast. Adhesion of the surface should be minimal 1,5 N/mm². Apply an epoxy scrape layer for porous surfaces, before applying the primer.

  • PURCOAT PRIM (PDF)

    waterbased two component epoxy primer

  • PURCOAT 1C (PDF)

    1 component polyurethane membrane used for long-lasting waterproofing of flat roofs, balconies, concrete terraces, public walkways,… Liquid-applied, highly permanent elastic, cold applied and cold cured on surface by reaction with ground and air moisture. Easy application by roller or airless spray.

  • PURCOAT 1C NET (PDF)

    Polyester – polypropylene fabric recommended within the PURCOAT 1C system.

  • PURCOAT 1C TOP (PDF)

    One component, colored, aliphatic polyurethane top coating. Colour protection and UV stable, highly permanent elastic, cold applied and cold curing used as a topcoat for over exposed, polyurethane waterproofing coatings.
Adcos youtube kanaal
 
Coating concrete
Coating concrete
 
 
 
 
ADCOS NV - Ambachtsstraat 15 - 2390 malle - info@adcos.be - T: +32 (0)3 385 38 50